.webp&w=3840&q=75)
Rewires & New Construction in Longview TX
From bare studs to final trim.
Whole-home rewires, new-construction rough-ins, additions, and remodels in Tyler, Longview & East Texas. From bare studs to final trim — wired clean, labeled, and inspection-ready.
- Licensed & insured
- Same-day response
- Permit-pulled work
Rewires & New Construction in Longview TX in Tyler, Longview & East Texas
A rewire is the most invasive electrical job a house can get — and in East Texas, plenty of houses have earned one. The century-old homes in Tyler's Azalea District still hide knob-and-tube behind plaster. Houses built in the late 60s and early 70s across Longview and Smith County often carry aluminum branch wiring, which loosens at connections over time and is a documented fire risk. And thousands of homes in between are running on cloth-insulated copper that's brittle, undersized, and ungrounded.
We do rewires the way they should be done: a room-by-room plan agreed up front, walls opened only where they must be, new grounded circuits throughout, and a new panel to anchor it all when the old one can't carry the load. The result is a house that's insurable, sellable, and safe — with every circuit labeled before we leave. If your home's wiring is sound but the devices are the problem, our redevice service is the lighter-touch option, and we'll tell you honestly which one your house actually needs.
On the new-construction side, we run full rough-in and trim packages for custom homes, additions, and major remodels — built around your GC's schedule, inspection-ready at every stage. We're the crew that shows up when the framers finish and doesn't hold up the drywall.
Signs it's time
- Knob-and-tube or cloth-insulated wiring in the attic
- Aluminum branch wiring (common in late-60s/70s homes)
- An insurer asking questions about your wiring before renewal
- Frequent breaker trips, flickering, or warm switch plates
- Two-prong outlets and no grounding throughout the house
- A remodel or addition that opens the walls anyway
Every wire,
every device.
Whether we're tearing out 60-year-old knob-and-tube or wiring a brand-new build from scratch, the standard is the same: clean runs, labeled circuits, no shortcuts.
- Whole-home rewires
- New construction rough-in & trim
- Redevices (series → parallel correction)
- Knob-and-tube replacement
- Aluminum wiring replacement
- Home additions & major remodels
- Shop & shed wiring
- New electrical services (underground/overhead)
Four steps.
No games.
From the first phone call to the final walk-through, the process is the same every time. Predictable on purpose.
- 01
You call. We listen.
Tell us what's going on — we'll get the basics and schedule a time to come see it. No high-pressure salesman, no script.
- 02
We visit the job.
Accurate pricing starts with eyes on the work. We show up when we said we would, walk the site, and give you a flat, written price — no guesswork.
- 03
Work done right.
Permit-pulled, code-compliant, neat. Tidy job site every day. We label circuits, clean up, and walk you through what we did.
- 04
We stand behind it.
If something we installed fails — that's on us, period. Call and we make it right. That's the only deal we know how to offer.
.webp&w=3840&q=75)
The difference is
in the details.
From bare studs to final trim.
- 01Knob-and-tube & aluminum replacement
- 02Full rough-in & trim packages
- 03Built around your GC's schedule
- 04Inspection-ready every stage
Questions we
hear a lot.
Straight answers about rewires & new construction in longview tx — and if yours isn't here, call and ask. A real person picks up.
Do I have to move out during a whole-home rewire?
Usually not. We stage the work room by room and keep power on in the areas where you're living. There are noisy, dusty days — we won't pretend otherwise — but most families stay in the house for the duration.
How long does a whole-home rewire take?
Most single-family rewires run one to two weeks depending on size, attic and crawlspace access, and how much of the house is plaster versus drywall. After we walk your home, we give you a written price and a schedule — and we keep both.
My house has aluminum wiring. Does all of it have to go?
Not always. Full replacement is the gold standard, but code-approved remediation (like properly installed connectors at every device) is a legitimate middle path for some homes and budgets. We'll lay out both options with real numbers after we see what you have.
Will a rewire help with insurance?
Often dramatically. Insurers in Texas increasingly decline or surcharge homes with knob-and-tube, aluminum branch wiring, or fuse panels. A documented, permitted rewire removes those flags — and we provide the documentation. If your insurer needs test results, we also do megohmmeter testing for insurance claims.
Can you wire my new custom home?
Yes — rough-in to final trim, coordinated with your builder's schedule. We'll also flag the things worth deciding early: EV charger capacity, generator provisions, and shop feeds are all far cheaper to plan at rough-in than to retrofit later.
A SW
6 days agoHighly recommend Chosen 1 Electric! Mark Reyes, the owner and a Master Electrician, was the only electrician I contacted who actually responded and followed through. I even had to cancel our original appointment the same day because of a family emergency, and he was incredibly understanding. When I rescheduled and explained I needed the work sooner, Mark fit me in. He and his assistant Abel didn’t just replace an outlet—they evaluated the existing setup, explained why we were having problems, identified what needed to be brought up to code, and gave us a practical solution so we could safely charge our car and connect our RV. Responsive, knowledgeable, professional, and dependable. Chosen 1 Electric is a newer local business, but Mark’s experience as a Master Electrician shows. I’ll absolutely call them again and highly recommend giving this local business an opportunity.
Sue Nolen
1 week agoMatt Yost
1 month agoI needed to have an RV plug installed in my garage and to also have a couple of ground fault outlets replaced. I was not sure who to call but after doing some online research I reached out to Chosen 1! Mark showed up exactly when he said he would and he completed the job quickly and professionally! I will definitely call him again with my electrical needs.
Andrea Webb
1 month agoI highly recommend this electrical company! It is so refreshing to find a company that is not only knowledgeable and reliable but also honest. Mark took the time to explain the issue, provided straightforward information, and did not try to pressure me into unnecessary repairs. The work was completly professionally, and I felt confident that I was being treated fairly. If you are looking for an electrician you can trust, I would definitely recommend them!
Jerry Gerber
1 month agoWhile we're
on the truck.
Most of our jobs touch more than one of these. If you need something we didn't list, just ask — odds are we do that too.
Rewires & New Construction across East Texas.
Our truck rolls from Big Sandy to Tyler, TX and Longview, TX every week — plus the smaller towns in between. If you're anywhere in 4 counties of East Texas, you're in our service area. Need this in Houston, TX? Visit our sister shop.
.webp&w=3840&q=75)
Ready when
you are.
Tell us about the job — we'll come out, see it in person, and give you a straight, written price.

.webp&w=3840&q=75)
.webp&w=3840&q=75)
.webp&w=3840&q=75)