.webp&w=3840&q=75)
Appliance Power Supply & Hardwiring in Longview TX
The right power for every appliance.
Dedicated circuits, hardwiring, and power supply installation for vent hoods, microwaves, ranges, dryers, and appliances in Tyler, Longview & East Texas.
- Licensed & insured
- Same-day response
- Permit-pulled work
Appliance Power Supply & Hardwiring in Longview TX in Tyler, Longview & East Texas
Modern appliances are power-hungry in ways older East Texas kitchens were never wired for. A new range can demand a 50-amp circuit where the old one ran on 40. An over-the-range microwave needs its own dedicated circuit — share it with the countertop outlets and you'll trip breakers every time the coffee maker runs. And the delivery crew that drops off your new appliance doesn't run wiring; they'll bolt it in place and leave the electrical problem sitting in your kitchen.
That gap is exactly what this service covers. We install dedicated circuits for ranges, ovens, dryers (30A and 50A), dishwashers, disposals, refrigerators, and washers; we hardwire vent hoods and over-the-range microwaves; and we set the correct receptacle types so a four-prong appliance isn't hanging off a three-prong cord and an adapter. Every connection is sized to the manufacturer's spec and to code, which matters for safety and for keeping the appliance warranty intact.
Appliance circuit problems are also a window into the bigger picture. If adding one dedicated circuit fills your last panel space — or the panel is already out of room — we'll show you what's going on and price the options honestly. We handle this work across Tyler, Longview, and the surrounding counties, usually in a single visit.
Signs it's time
- A new appliance that needs an outlet you don't have
- Breakers tripping when the microwave and coffee maker run together
- A three-prong dryer outlet for a four-prong cord (or vice versa)
- A vent hood or microwave hanging on an extension cord
- A remodel that's moving appliances to new locations
- An appliance installer who said "you'll need an electrician for that"
Every wire,
every device.
Modern appliances need dedicated circuits and proper wiring — not an extension cord and a prayer. We install the circuits, receptacles, and hardwired connections your appliances actually require.
- Vent hood installation & hardwiring
- Over-the-range microwave installation
- Range & oven dedicated circuits
- Dryer circuit installation (30A/50A)
- Dishwasher hardwiring
- Garbage disposal wiring
- Refrigerator dedicated circuits
- Washer outlet installation
Four steps.
No games.
From the first phone call to the final walk-through, the process is the same every time. Predictable on purpose.
- 01
You call. We listen.
Tell us what's going on — we'll get the basics and schedule a time to come see it. No high-pressure salesman, no script.
- 02
We visit the job.
Accurate pricing starts with eyes on the work. We show up when we said we would, walk the site, and give you a flat, written price — no guesswork.
- 03
Work done right.
Permit-pulled, code-compliant, neat. Tidy job site every day. We label circuits, clean up, and walk you through what we did.
- 04
We stand behind it.
If something we installed fails — that's on us, period. Call and we make it right. That's the only deal we know how to offer.
The difference is
in the details.
The right power for every appliance.
- 01Dedicated circuits for each appliance
- 02Vent hood & microwave hardwiring
- 03Range, dryer & dishwasher hookups
- 04Code-compliant installations
Questions we
hear a lot.
Straight answers about appliance power supply & hardwiring in longview tx — and if yours isn't here, call and ask. A real person picks up.
Why does my appliance need a dedicated circuit?
Because the manufacturer and code both require it for anything with a heavy or motor-driven load. A dedicated circuit means nothing else can overload it — so your dishwasher doesn't trip mid-cycle because somebody plugged in a space heater. It also keeps your warranty intact; manufacturers can deny claims on improperly wired appliances.
My new dryer cord doesn't match the old outlet. What's going on?
Your home likely has the older three-prong (ungrounded) dryer outlet, and modern dryers ship for four-prong grounded connections. The right fix is updating the circuit and receptacle to the grounded standard — not an adapter. It's a quick job for us and meaningfully safer.
Can you wire the vent hood or microwave the installer wouldn't touch?
Yes — this is one of our most common calls. Appliance delivery crews mount the unit but don't run wiring. We run the dedicated circuit, make the hardwired connection or set the receptacle, and leave it finished the way the installer assumed it already was.
Do you handle gas-to-electric appliance conversions?
We handle the electrical half — running the new 240V circuit a range or dryer needs where a gas unit only used a standard outlet. That's often a bigger circuit than the kitchen has ever had, so we check panel capacity as part of the quote.
What if my panel doesn't have room for another circuit?
It happens a lot in older homes — the panel filled up decades before anyone imagined this many appliances. Options range from reorganizing the panel to a sub-panel or full upgrade. We'll show you what's actually in the panel and price each path in writing.
Rustic Ridge Texas
3 weeks agoI can’t say enough good things about Mark with Chosen 1 Electric. I called him with an immediate need, and he was at my location within 15 minutes. This wasn’t a typical electrical job, and there were several moving parts that had to be coordinated, but Mark stayed the entire time and helped troubleshoot while we worked to get everything in place. What impressed me most was his willingness to jump in and help with things that weren’t even part of his job. He was incredibly patient, professional, and kind throughout the process. When everything was finally ready for him to do his portion of the work, he had it completed in less than five minutes. It’s rare to find someone who is not only knowledgeable and efficient but also genuinely cares about helping their customers. I will absolutely use Mark and Chosen 1 Electric again in the future, and I will gladly refer any customers, friends, or family who need electrical work done. Highly recommend! ⭐⭐⭐⭐⭐
amanda hayden
3 weeks agoMark and his guys are top notch electricians they worked on our house and did a phenomenal job we highly recommend these guys
Gael Valdivia
3 weeks agovery good service! got out here fast and got straight to work most definitely will work with him again
Caleb Moore
3 weeks agoBella
3 weeks agoAmazing company, mark is such a hard worker very dedicated to his job and helping others this is definitely the company for you.🙏
While we're
on the truck.
Most of our jobs touch more than one of these. If you need something we didn't list, just ask — odds are we do that too.
.webp&w=3840&q=75)
.webp&w=3840&q=75)
.webp&w=3840&q=75)
Appliance Power Supply & Hardwiring across East Texas.
Our truck rolls from Big Sandy to Tyler, TX and Longview, TX every week — plus the smaller towns in between. If you're anywhere in 4 counties of East Texas, you're in our service area.
Ready when
you are.
Tell us about the job — we'll come out, see it in person, and give you a straight, written price.