.webp&w=3840&q=75)
Advanced Testing for Insurance Claims in Longview TX
Hard data for your claim.
Megohmmeter (Meg) testing with detailed reports for insurance claims in Tyler, Longview & East Texas — documenting insulation resistance, circuit integrity, and damage assessment with hard data.
- Licensed & insured
- Same-day response
- Permit-pulled work
Advanced Testing for Insurance Claims in Longview TX in Tyler, Longview & East Texas
After a lightning strike, a surge, or a fire, the visible damage is only part of the story — the question your insurance company actually asks is whether the wiring inside the walls survived. "The lights work" isn't an answer an adjuster can pay a claim on. Measured data is. That's what megohmmeter testing provides: a quantified, circuit-by-circuit picture of your electrical system's condition.
A megohmmeter (insulation resistance tester) puts a controlled test voltage on de-energized wiring and measures how well the insulation still does its job. Healthy insulation reads high; wiring cooked by a surge, lightning, or heat reads low — even when it looks fine and even powers a light. We test the affected circuits, record the measured values, and assemble a photo-documented report tying the readings to the damage event. When the numbers show a circuit is compromised, the report supports replacement; when they show it's healthy, that's documented too, which protects you from paying for work the system doesn't need.
We've documented storm, lightning, surge, and fire claims across Tyler, Longview, and the East Texas counties in between, and we coordinate directly with adjusters when that helps the claim move. If covered damage leads to repair work — rewiring damaged circuits or panel replacement — we quote it from the same data the claim was built on.
Signs it's time
- Lightning struck your home or close nearby
- A surge took out multiple devices or appliances at once
- Fire or smoke damage anywhere near wiring
- An adjuster asked for electrician documentation
- A claim was denied for lack of evidence
- Breakers behaving strangely since a storm event
Every wire,
every device.
Insurance companies want numbers, not guesses. We perform megohmmeter testing on your wiring and circuits, generate detailed reports with measured values, and provide the documentation adjusters need to process your claim.
- Megohmmeter insulation resistance testing
- Circuit integrity verification
- Detailed photo-documented reports
- Insurance adjuster coordination
- Storm & lightning damage assessment
- Fire damage electrical evaluation
- Surge damage circuit testing
- Expert documentation for claim support
Four steps.
No games.
From the first phone call to the final walk-through, the process is the same every time. Predictable on purpose.
- 01
You call. We listen.
Tell us what's going on — we'll get the basics and schedule a time to come see it. No high-pressure salesman, no script.
- 02
We visit the job.
Accurate pricing starts with eyes on the work. We show up when we said we would, walk the site, and give you a flat, written price — no guesswork.
- 03
Work done right.
Permit-pulled, code-compliant, neat. Tidy job site every day. We label circuits, clean up, and walk you through what we did.
- 04
We stand behind it.
If something we installed fails — that's on us, period. Call and we make it right. That's the only deal we know how to offer.
The difference is
in the details.
Hard data for your claim.
- 01Megohmmeter (Meg) testing
- 02Detailed reports with measured values
- 03Insurance-adjuster-ready documentation
- 04Storm, fire & surge damage assessment
Questions we
hear a lot.
Straight answers about advanced testing for insurance claims in longview tx — and if yours isn't here, call and ask. A real person picks up.
What exactly is megohmmeter (Meg) testing?
It's insulation resistance testing: a controlled DC test voltage applied to de-energized wiring, measuring resistance in megohms. High readings mean the insulation is intact; low readings mean it's been compromised — by surge, heat, or age — even if the circuit still appears to work. It's the standard method for proving hidden wiring damage with numbers.
Why does my insurance company want this?
Because adjusters pay on evidence, not visual impressions. Lightning and surge damage to wiring is invisible from the outside, so claims without measured data stall or get denied. A report with circuit-by-circuit values, photos, and a licensed electrician's findings gives the adjuster something they can act on.
My power works fine after the strike. Could there still be damage?
Yes — that's the dangerous case. Insulation weakened by a surge can keep carrying power while it degrades toward a short or a fire months later. Testing now establishes the damage while it's clearly tied to the event, which matters for both safety and the claim window.
Will you talk to my adjuster directly?
Yes. We write reports adjusters can use without translation, and we'll get on the phone or email with them when questions come up. Claims move faster when the electrician and the adjuster aren't communicating through the homeowner like a game of telephone.
What happens if the testing finds damage?
The report documents which circuits are compromised and what replacement involves, which becomes the scope your claim pays against. If you'd like, we quote and perform the repairs — from single-circuit replacement up to whole-home rewires — but the report stands on its own either way.
Rustic Ridge Texas
3 weeks agoI can’t say enough good things about Mark with Chosen 1 Electric. I called him with an immediate need, and he was at my location within 15 minutes. This wasn’t a typical electrical job, and there were several moving parts that had to be coordinated, but Mark stayed the entire time and helped troubleshoot while we worked to get everything in place. What impressed me most was his willingness to jump in and help with things that weren’t even part of his job. He was incredibly patient, professional, and kind throughout the process. When everything was finally ready for him to do his portion of the work, he had it completed in less than five minutes. It’s rare to find someone who is not only knowledgeable and efficient but also genuinely cares about helping their customers. I will absolutely use Mark and Chosen 1 Electric again in the future, and I will gladly refer any customers, friends, or family who need electrical work done. Highly recommend! ⭐⭐⭐⭐⭐
amanda hayden
3 weeks agoMark and his guys are top notch electricians they worked on our house and did a phenomenal job we highly recommend these guys
Gael Valdivia
3 weeks agovery good service! got out here fast and got straight to work most definitely will work with him again
Caleb Moore
3 weeks agoBella
3 weeks agoAmazing company, mark is such a hard worker very dedicated to his job and helping others this is definitely the company for you.🙏
While we're
on the truck.
Most of our jobs touch more than one of these. If you need something we didn't list, just ask — odds are we do that too.
.webp&w=3840&q=75)
.webp&w=3840&q=75)
Advanced Testing for Insurance Claims across East Texas.
Our truck rolls from Big Sandy to Tyler, TX and Longview, TX every week — plus the smaller towns in between. If you're anywhere in 4 counties of East Texas, you're in our service area.
Ready when
you are.
Tell us about the job — we'll come out, see it in person, and give you a straight, written price.